Zen-Wu Y-2 Chisel
Y-2는 Zen-Wu 백지 탄소강(ZW-C2)을 중심으로 만든 서양식 벤치 치즐(범용 목공 끌)이며, 극저온 처리를 여러 번 포함한 열처리로 64 HRC입니다. 합금 원소와 불순물을 최소로 한 전통적인 탄소강 조성을, 날 유지력과 인성을 위해 현대적인 열처리로 다듬었습니다.
고전적인 설계에 베벨과 날 뒷면은 완전히 평평합니다. 끌 몸체에는 엄지를 받치는 면과, 손이 자연스럽게 잡는 지점의 모서리를 둥글게 덜어낸 부분이 있습니다. 밀어 다듬거나 쳐내는 작업을 길게 할 때 차이가 나는 부분입니다. 날 5-1/8"(130mm), 손잡이 5-1/2"(140mm), 전체 길이 10-5/8"(270mm). 30° 베벨로, 평평하게 갈아 바로 얇게 깎을 수 있는 상태로 배송합니다. 손잡이는 회수한 노령목 고리깍정이 참나무류(red ring-cupped oak)입니다.
Y-1 Chisel의 후속 제품입니다. Y-1은 ZW-C1을 63.5 HRC로 썼고, Y-2는 ZW-C2를 64 HRC로 올렸습니다.
1/2"와 3/4"는 스톤 워시 가공을 하지 않아 다른 치수보다 더 짙은 검정으로 나옵니다. 강재와 연삭은 같습니다.
우한 공방에서 보통 2일에서 4일 안에 발송하며, DHL 운송은 영업일 기준 3일에서 5일 걸립니다 (배송 정책).
관세와 세금은 결제 시 함께 청구되며, 수령할 때 추가로 낼 금액은 없습니다.
평생 보증, 365일 반품.
Overall rating: 4.6 / 5 from 15 reviews.
Review topics: [].
"I originally ordered a replacement plane Iron for my # 6 wood river plane. It turned it into a wonderful plane cutting 0. 5 mil shavings. That prompted me to buy the chisels that were perfectly flat backs and sharp out of the box. I have not done much with them yet other Han make a wall holder for them."
"My 6mm chisel is blunt after four strokes. I sharpen and repeat blunt again. I spent so much money and it’s much worse than Japanese steel."
"I have had my two Y2 chisels for about a month now and my experience with them has been very good. I can sharpen them to a mirror polish, they maintain their edge well, and were a significant upgrade to my last chisels. The handles are also quite comfortable. The packaging was memorable; I thought it was done very nicely. Critiques (that do not merit removal of stars): 1. I was rather hoping they would be subtilely labeled. 2. Shipping price significantly inflated the price, although it was very expedient and well communicated. 3. Minor finishing differences between the two I purchased. 4. One of the chisel’s steel is very slightly softer than the other. I would still buy them again."
"I bought a set of the Y-2 chisels, and I am very impressed. Even the attention to detail on the packaging was impressive! These things were razor-sharp out of the box, and they’re super sharp, still. The backs were flat, the handles were perfect in my hand, and the aesthetics are amazing as well. I’ll eventually add a set of the X-2’s, just because I want them and that leather chisel pouch, but that’s for another day. That’s no knock on these, because they will definitely get the job done! That’s a Lie Nielsen 3/4” chisel in the pic with them in case someone’s wondering about size / hand fit."
"Incredible edge retention. Beautifully balanced. I love this chisel."
"I purchased the 5/8" Y-2 chisel. The quality out of the box was amazing. It was sharp, and the back was flat; no work was needed to get it ready to use. I will continue to purchase their products."
"This blows my mind. I havent used many top tier chissels before. Only sharpened medium quality chisels myself to an razor edge. But this!!!. . . . Razor sharp out of the box! Almost so that it splits hair mid air! Easy to maintain said egde by simply polish quickly on leatherstrop with compund. Takes a beating without hurting the edge. Good design. I wish octagonal handles were an option as either an option, or as replacement-handles."
"Chisels arrived very quickly and again were very sharp and only requires stropping before use. I cannot recommend these enough because the cut better than any other chisel I've used."
"Some of the nicest chisels I have used and the easiest to set up for work. . . just a quick hone and you are off to the races. . . I like the balance and size of them as well, highly recomend"
"Thank you for reaching out. I purchased the chisel based on the excellent review in Fine Wood Working. I was disappointed by the finish on the back. It took much longer to flatten than expected and there remains a mark that would require a lot of work to remove. I was considering a 1/2" chisel but that's on hold for now. I will reconsider the purchase after using this chisel more. Thanks, Alan."